Built-in, low-profile or display platforms.Choose a starting point and we will align the technical details with your project.
✓LED lighting and remote control are included as standard.
Built-in and display models have a Ø 4.5 m rotating structure. For the S520, the overall Ø 5.2 m includes the fixed outer ring. On these configurations, a 4 cm wide stainless-steel ring sits on the fixed part, immediately beyond the gap between the two parts.
Integrate paving or a project-specific finish. The depth and weight of the surface layer must be coordinated with the structure.
Rotating deck diameter
Ø 4.5 m
Platform height
24.3 cm + surface layer
Surface shown
Paving, flush with the ground
Prices and terms+Built-in model for a project-specific finish24,375.00 € incl. VATPrice excluding VAT (B2B)19,500.00 €Base price on 10 September 202624,375.00 €incl. VAT
Built-in model for a project-specific finish
Business customers (B2B)
Price excluding VAT (B2B)
19,500.00 €
VAT 25%
4,875.00 €
Total including VAT
24,375.00 €
For one turntable in the stated specification. Includes 25% VAT. Installation, transport, site preparation and additionally selected customisations are not included. Price scope and terms
Installation, transport, site preparation and additional customisations are charged separately.
Full technical specifications+
Application
Indoors / outdoors depending on the configuration
Vehicle
One vehicle; dimensions and weight to suit the project
Height
24.3 cm + surface layer
Rotating deck diameter
4.5 m
Maximum vehicle mass
Up to 3,500 kg, depending on the finish
Surface finish
Tiles, grass or project-specific paving; finish up to 6 cm subject to the project
Access and ramp
Built-in, flush with surrounding surface
Service access
Removable deck sections for access to motor, track and drain
Corrosion protection
Hot-dip galvanising / zinc coating / powder coating depending on the configuration
Drive
Built-in electric motor
Direction of rotation
Both directions
Start and stop
Soft start and soft stop
Speed control
Toshiba — variable speed drive depending on the configuration
Operation
Manual operation; remote control included as standard; hold-to-run operation
Motor power
0.55 kW as specified for the model
Power supply
Single-phase 220 V as specified in the supplied electrical guide
Specified slope
Up to 3.5°; steeper slopes need a separate review
Operating temperature
−10 °C to +50 °C
Safety
Emergency stop and isolation switch at the control box
LED lighting
Included as standard
Consumption
Low consumption during operation
Catalogue system capacity is not the same as permitted vehicle weight. The cover and surface layer count towards the total load; usable capacity is confirmed for the selected configuration. Above-ground models require a suitable load-bearing base.
A finished aluminium or steel cover for the built-in platform.
Rotating deck diameter
Ø 4.5 m
Platform height
24.3 cm + surface layer
Surface shown
Aluminium plate, flush with the ground
Prices and terms+Aluminium cover24,875.00 € incl. VATPrice excluding VAT (B2B)19,900.00 €Base price on 10 September 202624,875.00 €incl. VATSteel cover24,375.00 € incl. VATPrice excluding VAT (B2B)19,500.00 €Base price on 10 September 202624,375.00 €incl. VAT
Aluminium cover
Business customers (B2B)
Price excluding VAT (B2B)
19,900.00 €
VAT 25%
4,975.00 €
Total including VAT
24,875.00 €
Steel cover
Business customers (B2B)
Price excluding VAT (B2B)
19,500.00 €
VAT 25%
4,875.00 €
Total including VAT
24,375.00 €
For one turntable in the stated specification. Includes 25% VAT. Installation, transport, site preparation and additionally selected customisations are not included. Price scope and terms
Installation, transport, site preparation and additional customisations are charged separately.
Full technical specifications+
Application
Indoors / outdoors depending on the configuration
Vehicle
One vehicle; dimensions and weight to suit the project
Height
24.3 cm + surface layer
Rotating deck diameter
4.5 m
Maximum vehicle mass
Up to 3,500 kg, depending on the finish
Surface finish
Aluminium or steel plate
Access and ramp
Built-in, flush with surrounding surface
Service access
Removable deck sections for access to motor, track and drain
Corrosion protection
Hot-dip galvanising / zinc coating / powder coating depending on the configuration
Drive
Built-in electric motor
Direction of rotation
Both directions
Start and stop
Soft start and soft stop
Speed control
Toshiba — variable speed drive depending on the configuration
Operation
Manual operation; remote control included as standard; hold-to-run operation
Motor power
0.55 kW as specified for the model
Power supply
Single-phase 220 V as specified in the supplied electrical guide
Specified slope
Up to 3.5°; steeper slopes need a separate review
Operating temperature
−10 °C to +50 °C
Safety
Emergency stop and isolation switch at the control box
LED lighting
Included as standard
Consumption
Low consumption during operation
Catalogue system capacity is not the same as permitted vehicle weight. The cover and surface layer count towards the total load; usable capacity is confirmed for the selected configuration. Above-ground models require a suitable load-bearing base.
A compact platform with a portable ramp for a suitable existing surface.
Platform diameter
Ø 4.5 m
Platform height
7.5 cm
Surface shown
Steel deck and portable ramp
Prices and terms+Indoor specification21,875.00 € incl. VATPrice excluding VAT (B2B)17,500.00 €Base price on 10 September 202621,875.00 €incl. VATOutdoor specification22,375.00 € incl. VATPrice excluding VAT (B2B)17,900.00 €Base price on 10 September 202622,375.00 €incl. VAT
Indoor specification
Business customers (B2B)
Price excluding VAT (B2B)
17,500.00 €
VAT 25%
4,375.00 €
Total including VAT
21,875.00 €
Outdoor specification
Business customers (B2B)
Price excluding VAT (B2B)
17,900.00 €
VAT 25%
4,475.00 €
Total including VAT
22,375.00 €
For one turntable in the stated specification. Includes 25% VAT. Installation, transport, site preparation and additionally selected customisations are not included. Price scope and terms
Installation, transport, site preparation and additional customisations are charged separately.
Full technical specifications+
Application
Indoors / outdoors depending on the configuration
Vehicle
One vehicle; dimensions and weight to suit the project
Height
7.5 cm
Platform diameter
4.5 m
Catalogue system capacity
4,500 kg
Surface finish
Smooth or patterned steel plate; choice of colour
Access and ramp
Portable ramp
Service access
Removable deck sections for access to motor, track and drain
Corrosion protection
Hot-dip galvanising / zinc coating / powder coating depending on the configuration
Drive
Built-in electric motor
Direction of rotation
Both directions
Start and stop
Soft start and soft stop
Speed control
Toshiba — variable speed drive depending on the configuration
Operation
Manual operation; remote control included as standard; hold-to-run operation
Motor power
0.55 kW as specified for the model
Power supply
Single-phase 220 V as specified in the supplied electrical guide
Specified slope
Up to 3.5°; steeper slopes need a separate review
Operating temperature
−10 °C to +50 °C
Safety
Emergency stop and isolation switch at the control box
LED lighting
Included as standard
Consumption
Low consumption during operation
Catalogue system capacity is not the same as permitted vehicle weight. The cover and surface layer count towards the total load; usable capacity is confirmed for the selected configuration. Above-ground models require a suitable load-bearing base.
Larger diameter and an integrated ramp; indoor or outdoor specification to suit the project.
Platform diameter
Ø 4.9 m
Platform height
7.5 cm
Surface shown
Steel deck and integrated ramp
Prices and terms+Indoor specification23,625.00 € incl. VATPrice excluding VAT (B2B)18,900.00 €Base price on 10 September 202623,625.00 €incl. VATOutdoor specification24,375.00 € incl. VATPrice excluding VAT (B2B)19,500.00 €Base price on 10 September 202624,375.00 €incl. VAT
Indoor specification
Business customers (B2B)
Price excluding VAT (B2B)
18,900.00 €
VAT 25%
4,725.00 €
Total including VAT
23,625.00 €
Outdoor specification
Business customers (B2B)
Price excluding VAT (B2B)
19,500.00 €
VAT 25%
4,875.00 €
Total including VAT
24,375.00 €
For one turntable in the stated specification. Includes 25% VAT. Installation, transport, site preparation and additionally selected customisations are not included. Price scope and terms
Installation, transport, site preparation and additional customisations are charged separately.
Full technical specifications+
Application
Indoors / outdoors depending on the configuration
Vehicle
One vehicle; dimensions and weight to suit the project
Height
7.5 cm
Platform diameter
4.9 m
Catalogue system capacity
4,500 kg
Surface finish
Smooth or patterned steel plate; choice of colour
Access and ramp
Integrated ramp
Service access
Removable deck sections for access to motor, track and drain
Corrosion protection
Hot-dip galvanising / zinc coating / powder coating depending on the configuration
Drive
Built-in electric motor
Direction of rotation
Both directions
Start and stop
Soft start and soft stop
Speed control
Toshiba — variable speed drive depending on the configuration
Operation
Manual operation; remote control included as standard; hold-to-run operation
Motor power
0.55 kW as specified for the model
Power supply
Single-phase 220 V as specified in the supplied electrical guide
Specified slope
Up to 3.5°; steeper slopes need a separate review
Operating temperature
−10 °C to +50 °C
Safety
Emergency stop and isolation switch at the control box
LED lighting
Included as standard
Consumption
Low consumption during operation
Catalogue system capacity is not the same as permitted vehicle weight. The cover and surface layer count towards the total load; usable capacity is confirmed for the selected configuration. Above-ground models require a suitable load-bearing base.
For garages, showrooms, exhibitions and single-vehicle presentations.
Rotating deck diameter
Ø 4.5 m
Platform height
24.3 cm
Surface shown
Steel deck with timber side slats
Prices and terms+Display turntable24,875.00 € incl. VATPrice excluding VAT (B2B)19,900.00 €Base price on 10 September 202624,875.00 €incl. VAT
Display turntable
Business customers (B2B)
Price excluding VAT (B2B)
19,900.00 €
VAT 25%
4,975.00 €
Total including VAT
24,875.00 €
For one turntable in the stated specification. Includes 25% VAT. Installation, transport, site preparation and additionally selected customisations are not included. Price scope and terms
Installation, transport, site preparation and additional customisations are charged separately.
Full technical specifications+
Application
Indoors / outdoors depending on the configuration
Vehicle
One vehicle; dimensions and weight to suit the project
Height
24.3 cm
Rotating deck diameter
4.5 m
Catalogue system capacity
3,500 kg
Surface finish
Steel plate / artificial grass / vinyl; timber side slats
Access and ramp
Heavy-duty portable ramp
Service access
Removable deck sections for access to motor, track and drain
Corrosion protection
According to the selected finish
Drive
Built-in electric motor
Direction of rotation
Both directions
Start and stop
Soft start and soft stop
Speed control
Toshiba — variable speed drive depending on the configuration
Operation
Manual operation; remote control included as standard; hold-to-run operation
Motor power
0.55 kW as specified for the model
Power supply
Single-phase 220 V as specified in the supplied electrical guide
Specified slope
Up to 3.5°; steeper slopes need a separate review
Operating temperature
−10 °C to +50 °C
Safety
Emergency stop and isolation switch at the control box
LED lighting
Included as standard
Consumption
Low consumption during operation
Catalogue system capacity is not the same as permitted vehicle weight. The cover and surface layer count towards the total load; usable capacity is confirmed for the selected configuration. Above-ground models require a suitable load-bearing base.
Rotating deck Ø 4.5 m with LED lighting at its edge and a fixed outer ring to an overall Ø 5.2 m.
Overall diameter
Ø 5.2 m
Platform height
24.1 cm
Surface shown
Vinyl deck and light-coloured side skirt
Prices and terms+Larger-diameter display turntable31,562.50 € incl. VATPrice excluding VAT (B2B)25,250.00 €Base price on 10 September 202631,562.50 €incl. VAT
Larger-diameter display turntable
Business customers (B2B)
Price excluding VAT (B2B)
25,250.00 €
VAT 25%
6,312.50 €
Total including VAT
31,562.50 €
For one turntable in the stated specification. Includes 25% VAT. Installation, transport, site preparation and additionally selected customisations are not included. Price scope and terms
Installation, transport, site preparation and additional customisations are charged separately.
Full technical specifications+
Application
Indoors / outdoors depending on the configuration
Vehicle
One vehicle; dimensions and weight to suit the project
Height
24.1 cm
Overall diameter
5.2 m
Catalogue system capacity
4,500 kg
Surface finish
Artificial grass / vinyl tiles or another agreed finish
Access and ramp
Heavy-duty portable ramp
Service access
Removable deck sections for access to motor, track and drain
Corrosion protection
Hot-dip galvanising / zinc coating / powder coating depending on the configuration
Drive
Built-in electric motor
Direction of rotation
Both directions
Start and stop
Soft start and soft stop
Speed control
Toshiba — variable speed drive depending on the configuration
Operation
Manual operation; remote control included as standard; hold-to-run operation
Motor power
0.55 kW as specified for the model
Power supply
Single-phase 220 V as specified in the supplied electrical guide
Specified slope
Up to 3.5°; steeper slopes need a separate review
Operating temperature
−10 °C to +50 °C
Safety
Emergency stop and isolation switch at the control box
LED lighting
Included as standard
Consumption
Low consumption during operation
Catalogue system capacity is not the same as permitted vehicle weight. The cover and surface layer count towards the total load; usable capacity is confirmed for the selected configuration. Above-ground models require a suitable load-bearing base.
The visualisation shows a selected finish and configuration. Refer to the specifications for authoritative dimensions and options. Retail prices are in euros for one turntable in the stated specification and include 25% VAT. Prices apply to the stated model and specification. Installation, transport, site preparation and additional requirements are not included in the platform price. Their scope and total cost are stated separately in the quotation before an order is placed.
Catalogue system capacity is not the same as permitted vehicle weight. The cover and surface layer count towards the total load; usable capacity is confirmed for the selected configuration. Above-ground models require a suitable load-bearing base.
BARTENI PARKING SYSTEMS
Official price list
Retail prices are in euros for one turntable in the stated specification and include 25% VAT.
Issued: 16. 11. 2026.
Official price list
Model / specification
Price excluding VAT (B2B)
Retail price
Base price on 10 September 2026
F450Built-in model for a project-specific finish
19,500.00 €
24,375.00 €
24,375.00 €
F450-MAluminium cover
19,900.00 €
24,875.00 €
24,875.00 €
F450-MSteel cover
19,500.00 €
24,375.00 €
24,375.00 €
N450Indoor specification
17,500.00 €
21,875.00 €
21,875.00 €
N450Outdoor specification
17,900.00 €
22,375.00 €
22,375.00 €
N490Indoor specification
18,900.00 €
23,625.00 €
23,625.00 €
N490Outdoor specification
19,500.00 €
24,375.00 €
24,375.00 €
SF450Display turntable
19,900.00 €
24,875.00 €
24,875.00 €
S520Larger-diameter display turntable
25,250.00 €
31,562.50 €
31,562.50 €
The base price is the price of the same specification on 10 September 2026, including VAT. Showing a base price does not indicate a promotion or discount.
Prices apply to the stated model and specification. Installation, transport, site preparation and additional requirements are not included in the platform price. Their scope and total cost are stated separately in the quotation before an order is placed.
The installation rate covers installation of one platform at a site prepared in accordance with the technical instructions. Transport, groundworks and work on the electrical installation are not included in this rate. Their scope and cost are established before an order is placed.
Installation, transport and rental
Service / billing unit
Price excluding VAT (B2B)
Retail price
Base price on 10 September 2026
Installation of built-in and showroom modelsInstallation of one platform at a prepared site
950.00 €
1,187.50 €
1,187.50 €
Installation of above-ground modelsInstallation of one platform at a prepared site
850.00 €
1,062.50 €
1,062.50 €
Barteni transport100 km of the agreed one-way route
150.00 €
187.50 €
187.50 €
Barteni transport costs 187.50 € including VAT per 100 km. It is charged proportionally to the actual distance of the agreed one-way route, not in 100-km blocks. The starting point, destination and distance are stated in the quotation. The total is rounded to two decimal places. Transport by an external carrier is arranged according to its quotation; the total costs are confirmed before acceptance.
Rental — price on request
Rental pricing is quoted individually according to the event type (indoor or outdoor), number of rental days and scope of installation and dismantling. Before accepting the quotation, you receive the total price including VAT and all associated costs, including transport if agreed. The quotation states the price excluding VAT, VAT and the total amount.
Prices and contracting terms
The price list is valid from its issue date until a new edition is published. The base price is a historical reference, not a statement of the lowest price in the preceding 30 days or an indication of a discount.
Product and installation
The platform price applies to the stated model and specification, with the standard equipment listed for that model. Surfaces and features shown in visualisations do not mean that every option is included in the price. Project-specific finishes, customisations and additional equipment are specified and charged separately unless included in the stated specification.
The installation rate covers installation of one platform at a site prepared in accordance with the technical instructions. Transport, groundworks and work on the electrical installation are not included in this rate. Their scope and cost are established before an order is placed.
Quotation, payment and additional costs
Submitting an enquiry or configuration does not place an order or create an obligation to pay. Before accepting a quotation, you receive the product and service specification, the total price including VAT and all agreed costs, and the payment, delivery and installation terms. The quotation states its validity period.
Additional work, equipment and charges require the customer's express prior consent. We apply the published prices for the stated standard specifications. A later price-list change does not alter an already agreed contract price.
Business customers and international deliveries
The public price list shows retail prices including Croatian VAT at 25% and a separately labelled net basis for business customers (B2B). This is a tax breakdown of the same price, not an additional discount. For deliveries outside Croatia, tax treatment, transport, any customs charges and the total amount are established before the quotation is accepted.
Statutory rights and complaints
The commercial warranty does not restrict consumers' statutory rights concerning defective goods. The one-year commercial warranty for self-assembly does not shorten the seller's statutory liability. Consumers have statutory protection for at least two years, in accordance with the applicable rules.
For consumer contracts concluded at a distance or away from business premises, we also provide pre-contract information on withdrawal rights, the withdrawal form and return costs, or on any applicable statutory exception. Manufacture to order alone does not automatically exclude that right.
Electric drive, rotation in both directions and soft start and stop. LED lighting and remote control are included as standard. The surface finish is coordinated with the selected model.
01
Drive and control
Mains supply and the electrical connection are defined in the technical documentation.
02
Surface finish
Paving, aluminium or steel, with colours and other finishes depending on the model.
03
Load and clearance
Vehicle weight, finish weight and clearance for the full vehicle envelope are assessed together.
04
Site preparation
For built-in models, we agree the excavation, levels, base, drainage and electrical connection in advance. Above-ground models need a level, load-bearing surface and a grounded outlet.